WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

ABB Model 10A4500 Glass Tube Rotameter

Model?

If you know the Model Number, enter it here and go to Quantity
Model/Part No.

Fluid Properites

Enter Fluid
Select Fluid Air Gas Liquid Water Enter Specific Gravity, or Density
Density
Density Units
Density Units kg/m3 kg/l lb/USgal lb/cu. ft. g/cm3 Maximum Pressure
Pressure Units psig psia barg bara kg/cm2 Maximum Temperature
Enter Temperature Units Deg F Deg C Operating Pressure
Pressure Units psig psia barg bara kg/cm2 Operating Temperature
Enter Temperature Units Deg F Deg C Max. Flow rate
Flow Rate Units gal/hr cc/min (ccm) sccm (gas std. cc) SCFH gal/min Normal Flow rate
flow Rate Units gal/hr cc/min (ccm) sccm (gas std. cc) SCFH SCFM gal/min Viscosity
Centipoise

Features and Options

Seals
Enter Connection Type [55] O-Ring [56] Packing Gland Connection
Connection [5] Horizontal threaded [6} Horizontal Flanged [7] Vertical Threaded [8] Vertical Flanged Scale Type
Select Scale Type [X] Percent on tube [Y] Direct reading on tube [E] Direct reading metal scale and percent on tube [P] Percent on metal scale [S] Direct reading metal scale [D] Dual direct reading metal scales Mounting
Mounting [X] Line Mounted [Y] Front panel mounted (see Note 1) [Z] Rear (flush) panel mounted (see Note 2) Connection Size
Enter Connection Size [H] Connector: 1/2 in., tube: 1/2 in. [J] Connector: 3/4 in., NPT, tube: /4 in. [K] Connector: 3/4 in., NPT, tube: 1 in. [L] Connector: 1 in., flanged, tube: 3/4 in. [M] Connector: 1 in., flanged, tub: 1 in. [N] Connector: 1-1/2 in., tube: 1-1/2 in. [P] Connector: 1-/2 in. tube: 2 in. Frame
Select Fitting Material [C] AISI 316 stainless steel (1.4401) [F] PVC (see Note 4) Seal Material
Enter Seal Material [E] Packing gland design neoprene (see Note 5) [D] Packing gland design PTFE [F] O-Ring design Buna-N (see Note 5) [H] O-Ring design Viton (not used with ammonia) (see Note 5) [J] O-Ring design EPR (see Note 5) Connection Type
Select Connection Type [B] Threaded (NPT) [C] Flanged – flat face PVC class 125 [D] Flanged – SST RF class 150 Alarms
Select Alarms [X] Not required [C] Low alarm, SPDT [B] High alarm, SPDT [D] High / low alarm, SPDT [F] Low alarm, DPDT [E] High alarm, DPDT [G] High / low alarm, DPDT [H] High / high alarm, SPDT [J] Low / low alarm, SPDT [K] High / high alarm, DPDT [L] Low / low alarm, DPDT Inlet Connection
Inlet Connection [1] Front [2] Back [3] Right [4] Left [5] Bottom vertical Outlet Connection
Outlet Connection [1] Front [2] Back [3] Right [4] Left [5] Top vertical Float Code

Float Material
Float Material [1] 316 stainless steel (standard) [2] Hastelloy C [3] Monel [4] Tantalum [5] PVC [6] PTFE Tube Code

Accuracy Calibration
Accuracy Calibration [C1] Standard; uncalibrated accuracy [C2] Calibrated accuracy; liquids at 1 ctks. viscosity [C3] Calibrated accuracy; liquids at viscosity up to 100 ctks. (1/2, 3/4 and 1 in.) [C4] Calibrated accuracy; liquids at viscosity up to 100 ctks. (11/2 and 2 in.) [C6] Calibrated accuracy; gas service (stainless steel fittings only) Optional External Needle Valve
No Valve [V3] 1/2 in. NPT, part number 614C068U03 (see Note 9) [V4] 3/4 in. NPT, part number 614C068U04 (see Note 9) Oxygen Cleaning
No Oxygen Cleaning [P1] Oxygen cleaning per ABB 3BUJ980096 Certificate of Conformance
No Certificate of Conformance [D1] Certificate of conformance; per order Material Certification
No Material Certification [M1] 'Typicals' per material Pressure Test
No Pressure Test [H1] Hydrostatic pressure test; 1/8 to 1/2 in. diameter [H2] Hydrostatic pressure test; 3/4 to 1 in. diameter [H3] Hydrostatic pressure test; 11/2 to 2 in. diameter Stainless Steel Tags No Tags [T1] Stainless steel (wired on – per meter))

Contact Information

Quantity First Name Last Name
E-mail
End Use Country Notes