IPT-10 Intrinsically Safe or Flameproof
Process Transmitter for Hazardous Areas
|
 |
IPT-10 Applications:
IPT-10 Data Sheet
Catalog Page |
IPT-10 Special Features
 | Explosion protection Ex ia IIC T6 acc. to ATEX and FM
for the use in hazardous environments:
- gases and mists: zone 0, zone 1, connection to zone 0
- dust: zone 21, connection to zone 20 |
| Scaleable measuring ranges via Turn down of up to 1 :
30 |
| Measuring ranges from
0 ... 0,1 bar up to 0 ... 4000 bar and
0 ... 0,1 bar abs up to 0 ... 16 bar abs |
| High measuring accuracy |
| Model IPT-10 can be combined with diaphragm seals |
|
Type E-10 Explosion Proof Pressure Transmitter
for Hazardous Areas |
 |
E-10 Applications:
| Wellhead monitoring |
| Refining, chemical, petrochemical |
| Offshore platforms, pipelines |
| Natural gas compressors |
E-10 Data Sheet
E-10 Datalog Page |
E-10 Special Features
| FM-approved Explosion proof for Class I Division 1 hazardous
locations |
| Available with 4 ... 20 mA, 2-wire or 1 ... 5 V, 3-wire low power
output signals |
| Engineered to withstand harsh environments
|
| NACE MR0175 compliant |
| Retrofits many existing oil and gas applications |
|
E-11 Explosion Proof Pressure Transmitter
for Hazardous Areas |
 |
E-11 Applications:
| Wellhead monitoring |
| Refining, chemical, petrochemical |
| Offshore platforms, pipelines |
| Natural gas compressors |
E-11 Data Sheet
E-11Catalog Page |
E-11 Special Features
| FM-approved Explosion proof for Class I Division 1
hazardous locations |
| Available with 4 ... 20 mA, 2-wire or 1 ... 5 V,
3-wire low power output signals |
| Engineered to withstand harsh environments
|
| NACE MR0175 compliant |
| Retrofits many existing oil and gas applications |
|
IS-20 Intrinsically Safe Pressure Transmitter
for Hazardous Areas |
 |
IS-20 Applications:
| Chemical, Petrochemical |
| Oil and gas refining |
| Food industry |
| Mechanical engineering |
IS-20 Data Sheet
IS-20 Catalog Page |
IS-20 Special Features
| Pressure ranges from 50 INWC to 15,000 PSI
|
| FM, CSA approval for Intrinsically safe Class I, II
and III Division 1,
Group A, B, C, D, E, F, G; Dust Class II and III Division 1, Group E, F,
G; Class I, Zone 0, AEx ia II C |
| Ex- protection EEx ia I/II C T6 according to ATEX
for gases, vapors and mist (to Zone 0, Zone 1 and Zone 2); dust:
Connection to Zone 20, Zone 21 and Zone 22; mining (M1 and M2) |
|
IS-21 Intrinsically Safe Pressure Transmitter
for Hazardous Areas |
 |
IS-21Applications:
| Flat, non-clogging diaphragm for media containing
particulates |
| Chemical, Petrochemical |
| Oil and gas refining |
| Water & wastewater treatment |
| Food industry |
IS-21 Data Sheet
IS-21 Catalog Page |
IS-21Special Features
| Pressure ranges from 50 INWC to 8,000 PSI
|
| IS-21-S features standard DIN connector |
| IS-21-F features all stainless steel construction and
integral junction box |
| FM, CSA approval for Intrinsically safe Class I, II
and III Division 1, Group A, B, C, D, E, F, G; Dust Class II and III
Division 1, Group E, F, G; and Class I, Zone 0, AEx ia II C
|
| Ex- protection EEx ia I/II C T6 according to ATEX for
gases, vapors and mist (Connection to Zone 0, Zone 1 and Zone 2); dust
(Connection to Zone 20, Zone 21 and Zone 22) and mining (Category M1 and
M2) |
|
N-10 Non-incendive Pressure Transmitter
for Hazardous Areas |
 |
Type N-10 Applications:
| Natural gas compressors |
| Wellhead monitoring |
| Pipeline pressure |
| General industrial applications |
N-10 Data Sheet
N-10 Catalog Page |
Type N-10 Special Features
| FM approved Non-incendive for Class I Division 2
hazardous locations |
| Engineered to meet the harsh demands of gas
compressor applications |
| Do not require the use of intrinsically safe barriers
|
| NACE MR-01-75 compliant |
| 4-20 mA or low power 1-5 volt output signals
available |
|
N-11 Non-incendive Pressure Transmitter
for Hazardous Areas |
 |
Wika Type N-11 Applications:
| Natural gas compressors |
| Wellhead monitoring |
| Pipeline pressure |
| General industrial applications |
N-11
Data Sheet
N-11 Catalog Page |
Wika Type N-11 Special Features
| FM approved Non-incendive for Class I Division 2
hazardous locations |
| Engineered to meet the harsh demands of gas
compressor applications |
| Do not require the use of intrinsically safe barriers
|
| NACE MR-01-75 compliant |
| 4-20 mA or low power 1-5 volt output signals
available |
|
