WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Precision Pressure Gauges and Portable Calibrators
Please note that WALLACE & TIERNAN is now a trademark of Evoqua Water Technologies LLC, and the products offered here are no longer manufactured under the WALLACE & TIERNAN name.
The manufacturing of the Wallace & Tiernan
precision pressure gauges and calibrators has been relocated from Germany and
are now being made in the U.S. by WIKA Instrument Corporation. They are
certified to NIST Standards before shipment. The Certificate of Calibration
is included at no additional cost
Series 1000 6" Dial High Precision Differential Pressure Gauges
Series 1000 Gauges have capsule-type pressure elements and pressure and static connections. High differential pressure is applied to the capsule; low pressure, to the case. Available in 22 standard ranges, they combine aneroid convenience with liquid-column accuracy. They are compact for efficient panels and consoles, yet readability is excellent.
STANDARD FEATURES
- Size: 6" dial
- Scale Length: Approx. 30" through 2 pointer revolutions
- Range: To 150 psi
- Accuracy: 0.1% of full scale
- Repeatability: 0.03% of full scale
- Sensitivity: 0.01% of full scale
- Hysteresis: 0.1% of full scale for all ranges except 150 psi or equivalent, which is 0.2% of full scale
- Maximum Temperature Effect: 0.1% of full scale per 10°C/50°F change from 23°C/ 73.4°F
- Pressure Element Volume:
Pressure Element Volume:
6.9 cc with pointer at zero;
8.6 cc at full scale.
For the range 0-125" water only:
6.3 cc with pointer at zero;
8.0 cc at full scale - Case volume: 1775 cc, with overpressure relief valve built into the back of the case
- Maximum case pressure: 35 psig
- Maximum case leak rate: Will not exceed 6.34 x 10-5 std cc/sec 0.0018 psi/hr.
- Case Connections: 1/8" female NPT pressure and static connections. Stainless steel filters are mounted in the orifice of both units and are located in the bottom of the case.
- Case Construction: Cast aluminum with tempered-glass dial cover. The bezel has no screw holes; the case has special clips for easy flush mounting.
STANDARD RANGES AND ORDERING NUMBERS
Series 1000 6" Differential Pressure Gauge
Range & Calibration | Ordering Number | Graduation |
---|---|---|
0-4.5 psi | 62B-4A-0005 | 0.01 psi |
0-10 psi | 62B-4A-0010 | 0.02 psi |
0-15.5 psi | 62B-4A-0015 | 0.02 psi |
0-20 psi | 62B-4A-0020 | 0.05psi |
0-30 psi | 62B-4A-0030 | 0.05 psi |
0-45 psi | 62B-4A-0045 | 0.1 psi |
0-60 psi | 62B-4A-0060 | 0.1 psi |
0-100 psi | 62B-4A-0100 | 0.2 psi |
0-150 psi | 62B-4A-0150 | 0.2 psi |
0-125" water | 62B-4C-0125 | 0.2" |
0-280" water | 62B-4C-0280 | 0.5" |
0-800 mm Hg | 62B-4D-0800 | 1.0 mm |
0-31.5" Hg | 62B-4B-0031 | 0.05" |
0-60" Hg | 62B-4B-0060 | 0.1" |
0-120" Hg | 62B-4B-0120 | 0.2" |
0-200" Hg | 62B-4B-0200 | 0.5" |
0-300" Hg | 62B-4B-0300 | 0.5" |
Series 1000 6" Differential Pressure Gauge - Vacuum and Compound Ranges
Range & Calibration | Ordering Number | Graduation |
---|---|---|
-30" Hg to 0 | 62B-7B-0030* | 0.05" |
-15" to 0 to 15" Hg | 62B-6B-0030* | 0.05" |
-30" to 0 to 30" Hg | 62B-6B-0060* | 0.1" |
-30" to 0 to 90" Hg | 62B-6B-0120* | 0.2" |
-30" to 0 to 270" Hg | 62B-6B-0300* | 0.5" |
*Can be calibrated as shown, or in any other standard pressure unit at no extra cost. Specify if other than in Hg. |