WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
WIKA - Submersible Level transmitters
The WIKA electronic pressure transmitters, also known as the tronic line of Pressure transmitters are a series of compact pressure transmitters designed for long term, reliable performance in different and diffictrt industrial environments. Most models feature stainless steel construction, moisture and vibration protected circuitry, and all are calibrated and tested prior to shipment. A variety of options are available on most models to meet specific needs. The Wika electronic pressure measurement line includes
List of all Wika Tronic pressure transmitters
LS-10 Submersible Liquid Level transmitter
Level measurement in water and wastewater treatment plants, wells, holding tanks, wet wells, rivers
The LS-10 liquid level transmitter is designed for economical and reliable performance in a wide variety of level measurement applications. The LS-10 provides a signal output of 4-20mA and an accuracy of 0.25% of span. Standard stocked pressure ranges are assembled with any length cable for fast deliver
Special Features
- Ranges from 50INWC to 400PSI
- Rated IP 68 for permanent submersion
- Hastelloy case available for aggressive media
- 4-20 mA 2-wire output signal, others available
- Lightning protection available
- Cable supports over 220 pounds of strain
LH-10 Submersible Liquid Level transmitter
Level measurement in water and wastewater
treatment plants, wells, holding tanks, wet wells, rivers.
The high performance Type LH-10 provides 0.125% accuracy
and is available with many custom features for special
requirements. LH-10 options include lightning protection,
temperature measurement, special output signals, plus FEP cable
and Hastelloy®
construction for aggressive media.
The LH-10 is available with a low power 0.5-2.5V output signal
and 5VDC supply voltage. This is ideal for solar or battery powered
installations.
The LH-10 includes a dual cable entry design that prevents
ingress of moisture into the electronics even if the cable is
damaged. Both types feature watertight vented cable that
can withstand over 220 pounds of strain. This allows the
transmitter to be supported without any additional cabling
Special Features
- Ideal for Solar Powered Installations
- Ranges from 50INWC to 400PSI
- Rated IP 68 for permanent submersion
- Hastelloy case available for aggressive media
- 4-20 mA 2-wire output signal, others available
- Lightning protection available
- Cable supports over 220 pounds of strain
IL-10 Submersible Liquid Level transmitter Intrinsically Safe
Level measurement in water and wastewater treatment plants, wells, holding tanks, wet wells, rivers.
The IL-10 intrinsically safe level transmitter is designed for
use in a wide variety of level measurement applications. The
IL-10 provides a BFSL accuracy better than 0.25% of span
and an output signal of 4-20mA.
The IL-10 has FM, ATEX and CSA approvals for installation in
hazardous areas when used with the appropriate intrinsically
safe zener barrier. The cable can withstand up to 220 pounds
of starin, also, no additional cable support is required.
The IL-10 includes a dual cable entry design that prevents
ingress of moisture into the electronics even if the cable‘s
outer jacket is damaged. Compensation for changes in
barometric pressure is accomplished through a vent tube in
the cable. Many accessories, including cable clamps, drying
cartridges and junction boxes are available for specific instal-
lation requirements
Special Features
- FM approved intrinsically safe for Class I Division I and Class I Zone 0 locations when used with an approved barrier
- 0.125% B.F.S.L. accuracy with 0.05% repeatability
- Rated IP 68 for permanent submersion
- Vented polyurethane cable withstands 220 pounds of sulain
- Teflon cable available as option
- For level measurement to 900 feet
LEVELGUARD Submersible Liquid Level Anti-Clog Attachment
Designed for difficult level sensing applications
where sludge, slurry, or turbulence may be present.
he WIKA LevelGuard
TM
attachment for submersible transmit-
ters is designed for difficult level sensing applications where
sludge, slurry, or turbulence may be present. It is available with
the LS-10, LH-10 high performance, and IL-10 FM Approved
intrinsically safe submersible level transmitters.
The large, two inch diaphragm provides excellent sensitivity
and performance even when used to monitor extremely low
liquid levels or when the assembly is buried in a layer of sludge
or slurry. The cable supplied with WIKA submersible pressure
transmitters is designed to withstand over 200 pounds of strain
so no additional support or conduit connections are required.
It is available with the LS-10, LH-10 high
performance, and IL-10 FM Approved intrinsically safe submersible level
Special Features
- For lift stations, wet wells and other level applications
- All 316 stainless steel construction for durability
- 2" diameter diaphragm provides excellent sensitivity
- Diaphragm is protected from physical damage and turbulence
- Added weight prevents movement of the transmitter
Home