ABB Valve Positioners (TZID, TZID-C & Bailey AV Series)
These were formally made under the Sensycon Brand name
Click for New Positioners Page
Click for List of Standard US TZIDC Positioners
Overview of ABB (Sensycon) Valve Positioners
| MODEL NAME | MODEL IMAGE | MODEL CODE | DESCRIPTION | Data Sheet |
|---|---|---|---|---|
| EPD300 Intelligent Valve Positioner |
 |
EPD300 | PositionMaster EDP300 Electro-Pneumatic Positioner |
EPD300 Specifications |
| TZIDC (V18345) Intelligent Positioners |
 |
V18345 TZIDC | Intelligent Positioner with HART | TZID-C Specifications |
| V18346 TZID-C110 | TZID-C with interface to Profibus | TZIDC-110 Specifications | ||
| V18347 TZID-C120 | TZID-C with interface to FOUNDATION Fieldbus™ | TZIDC-120 Specifications | ||
| TZIDC-200 with Explosion Proof Enclosure |
 |
V18348TZID-C200 | TZID-C200 for for hazardous locations | TZIDC-200 Specifications |
| V18349 TZID-C210 | TZID-C200 with interface to Profibus | TZIDC-210 Specification | ||
| V18350 TZID-C220 | TZID-C200 with interface to FOUNDATION Fieldbus™ | TZIDC-220 Specifications | ||
| TZID (V18341) Intelligent Valve Positioner |
 |
V18341 TZID | Intelligent Positioner - No Longer Manufactured See Recommendations | |
| V18342 TZID Exd | Explosion proof TZID. This has been replaced by the TZIDC-200 | |||
| TZIM (V18333) Valve Positioner |
 |
V18333 TZIM | Simple Electro-pneumatic positioner for low cost applications NOTE: THIS UNIT IS NO LONGER BEING SOLD TZIM Obsolete |
TZIM Specifications |
| Bailey Controls AP & AC Positioners |
Bailey Controls AP & AC Units | These units are obsolete and parts are no longer available but can be replaced by the AV or TZID positioners. Please see the Conversion Guide ----> | ABB AC, AP Conversion Guide | |
| ABB-Bailey Valve Positioners |
 |
Bailey Controls AV1 | Type AV1 positioner are pneumatic positioners that use a pneumatic input to control the pneumatic output. | AV Series Specifications |
| Bailey Controls AV2 | Type AV2 and AV3 positioners are electro-pneumatic, with Type AV2 and AV3 using an I/P (current-to-pneumatic) converter to accept a four to 20-milliampere input signal and convert it to a pneumatic output. The Type AV2 fails open/closed | |||
| Bailey Controls AV3 | Type AV3 fails in place on loss of current input signal. |